Massoth Product List Massoth Loco & Function Decoders Massoth M Locomotive Decoder


Massoth eMOTION M Locomotive Decoder

Product number: 8154501
$62.90 plus shipping

In stock for immediate delivery
Please contact us to order

eMotion M Locomotive Decoder

The Massoth eMOTION M decoder is an ultra-compact, 2.0 Amps driving and function decoder designed for installation in exceptionally small locomotives.

It features selectable 14/28/128 speed steps, 2 light and 5 function outputs with a maximum total load capacity of 1.0 Amp, analog and digital operation, digital and analog Back EMF, and a Massoth-SUSI interface.

The Massoth eMOTION M decoder is fully compatible with NMRA/DCC, and compatible with all generations of the LGB® MTS system.

Operating the M decoder with an additional power buffer increases its dependability: brief track power disruptions are bridged in analog and digital operation, and contaminated tracks and switch frogs are negotiated without any speed changes or interruptions.

Summary of Features:

  • Total amperage: 2.0Amps
  • Motor amperage: 1.2AMps
  • Light and function outputs amperage: 1.0Amps
  • 10239 Locomotive addresses
  • 14/28/128 speed steps
  • 256 internal speed steps
  • Programmable speed curve
  • Adjustable starting, mid, and maximum speed
  • Adjustable acceleration and deceleration time
  • Adjustable motor frequency (70HZ-16kHz)
  • Latest load control technology, Back-EMF, analog and digital
  • Switching speed activated with mappable function key
  • 2 light outputs, 2x 300mAmps (front and rear)
  • 5 function outputs, 2 x 300mAmps(A1-A2), 2 x 50mAmps (A5-A6), 1 x 10mAmps (A3)
  • Connection for optional power buffer
  • RC servo control channel
  • Connection for pulse simulation function
  • Massoth-SUSI interface
  • Light and function outputs dimmable; can be activated in analog operation
  • Programmable blinking lights, short-duration function, and pulse generator function
  • Compatible with NMRA DCC and all generations of the LGB® MTS system
  • Digital and analog operation with automatic recognition
  • Serial and parallel control of all lights and function outputs including LGB® P-sound updates
  • Parallel and serial control of LGB® sound modules
  • Overload protection for motor and function outputs
  • Overheat protection for motor and function outputs
  • Easy to use function mapping with direction assignment
  • Rest function for all CV values
  • CV-read
  • CV-write
  • CV-write (bit by bit)
  • CV indirect programming - register programming for old digital system
  • CV direct register programming (CV1-CV4)
  • Programming-on-Main (POM)
  • firmware updatable

Technical specifications

  • Power supply: 0-24 Volts DC/DCC
  • Maximum total load: 2Amps
  • Motor output: Max. 1.2Amps, 70Hz-16kHz, load controlled, digital and analog
  • Light outputs: Max.(2 X 300mAmps) 22V dimmable
  • Function outputs [1, 2]: Max.(2 X 300mAmps) 22V dimmable
  • Function output 3: Max. (1x 10mAmps) 5V
  • Function outputs [5, 6]: Max. (2 x 50mAmps) 22V
  • Total light and function outputs combined: Max. 1Amp
  • Temperature Range: -4°F to 122°F
  • Dimensions: 27x14x6.5mm

Scope of Delivery

  • eMOTION M Decoder
  • Double-sided Tape
  • User's Manual
  • Configuration Manual

Adobe Thumbnail
User's manual

Adobe Thumbnail
Configuration manual

← Back