Massoth Product List Massoth Loco & Function Decoders Massoth XL-M1 Locomotive Decoder


Massoth eMOTION XL-M1 Locomotive Decoder

Product number: 8150501
$89.90 plus shipping

In stock for immediate delivery
Please contact us to order

eMotion XL-M1 Locomotive Decoder

The Massoth eMOTION XL-M1 decoder is a powerful 4.5Amps driving and function decoder designed for installation in G-scale locomotives equipped with the Märklin-LGB 28-pin decoder interface. It can operate up to 2 driving motors with a maximum current draw of 3.5Amps. The decoder plugs directly into the Märklin-LGB 28-pin decoder interface board.

The XL-M1 decoder features selectable 14/28/128 speed steps, 3 light outputs, 8 function outputs, 2 contacts inputs, analog and digital operation, adjustable load control for digital and analog operation, and a SUSI-MTB(Märklin Train Bus) interface. The XL-M1 decoder supports 16 addressable functions in standard mode and 28 addressable functions in conjunction with SUSI-MTB.

The Massoth eMOTION XL-M1 decoder is fully compatible with NMRA/DCC, and compatible with all generations of the LGB® MTS system including serial and parallel control.

Operating the XL-M1 decoder with an additional power buffer increases its dependability: brief track power disruptions are bridged in analog and digital operation and contaminated tracks and switch frogs are negotiated without any speed changes or interruptions.

Summary of Features:

  • Total amperage: 4.5Amps
  • Motor amperage: 3.5AMps
  • Light and function outputs amperage: 1.2Amps
  • 10239 Locomotive addresses
  • 14/28/128 speed steps
  • 256 internal speed steps
  • Programmable speed curve
  • Adjustable starting, middle, and maximum speed
  • Adjustable acceleration and deceleration time
  • Adjustable motor frequency (90Hz-16kHz)
  • Latest load control technology, Back-EMF, analog and digital
  • Switching speed activated with mappable function key
  • 3 light outputs, 3 x 600mAmps (front, interior, and rear)
  • 8 function outputs, 6 x 300mAmps(A1-A6), 2 x 10mAmps(A7-A8
  • 2 reed contact inputs
  • Connection for power buffer
  • Connection for pulse generation function
  • RC servo control channel
  • SUSI-MTB interface
  • Light and function outputs dimmable; can be activated in analog operation
  • Programmable blinking lights, short-duration function, and pulse generator function
  • Compatible with NMRA DCC and all generations of the LGB® MTS system
  • Digital and analog operation with automatic recognition
  • Serial and parallel control of all lights and function outputs including LGB® P-sound updates
  • Parallel and serial control of LGB® sound modules
  • Overload protection for motor and function outputs
  • Overheat protection for motor and function outputs
  • Easy to use function mapping with direction assignment
  • All function output are freely addressable (F1 -F28)
  • Rest function for all CV values
  • CV-read
  • CV-write
  • CV-write (bit by bit)
  • CV indirect programming - register programming for old digital system
  • CV direct register programming (CV1-CV4)
  • Programming-on-Main (POM)
  • firmware updatable

Technical specifications

  • Power supply: 0-24 Volts DC/DCC
  • Maximum total load: 4.5Amps
  • Motor output: Max. 3.5Amps, 60Hz-16kHz, load controlled, digital and analog
  • Light outputs: Max.(3 X 600mAmps) 22V dimmable
  • Function outputs [1-6]: Max.(6 X 300mAmps) 22V dimmable
  • Function outputs [7-8]: Max.(2 x 10mAmps) 5V
  • Total light and function outputs combined: Max. 1.2Amps
  • Temperature Range: -4°F to 122°F
  • Dimensions: 48x32x18mm

Scope of Delivery

  • eMOTION XL-M1 Decoder
  • User's Manual

Adobe Thumbnail
User's manual

← Back