LGB Parts & Accessories → Smoke Generators
Our repair parts and accessories are imported from Germany and manufactured by LGB®, Massoth, or one of the many LGB® OEMs. Please do not hesitate to contact us for all your LGB® locomotives repair parts and accessories needs. Our hours of operation and contact information are posted on our contact page.
| Maintenance Parts | Replacement Motors | Replacement Gears | ||
| Wheels and Wheel sets | Smoke Generators | Bulbs and Sockets | ||
| Track Cleaning Pads | Cables and Connectors | |||
Massoth Smoke Generator for LGB® Locomotives, 5V (~LGB® 65853)
$32.90 plus shipping
In stock
Please contact us to order
Product number: 8310101
Suitable for most LGB® locomotives with voltage stabilization circuitry.
For best results, the smoke generator should be filled no more than half way, otherwise the fluid will cool the heating element to the point that it may not get hot enough for the unit to smoke adequately. Smoke volume decreases significantly if the smoke generator is overfilled.
Even tough the smoke generator will not be damaged if run dry, we recommend turning it off if possible, when empty, to extend its life.
Massoth Smoke Generator for LGB® Locomotives, 24V (~LGB® 65553)
$32.90 plus shipping
In stock
Please contact us to order
Product number: 8310301
Suitable for many LGB® locomotives with a decoder on-board and no voltage stabilization circuitry.
For best results, the smoke generator should be filled no more than half way, otherwise the fluid will cool the heating element to the point that it may not get hot enough for the unit to smoke adequately. Smoke volume decreases significantly if the smoke generator is overfilled.
Even tough the smoke generator will not be damaged if run dry, we recommend turning it off if possible, when empty, to extend its life.
Massoth Smoke Generator for LGB® Locomotives, 18V (~LGB® 65803)
$32.90 plus shipping
In stock
Please contact us to order
Product number: 8310201
Suitable as a substitute for an LGB® 18V Smoke Generator.
For best results, the smoke generator should be filled no more than half way, otherwise the fluid will cool the heating element to the point that it may not get hot enough for the unit to smoke adequately. Smoke volume decreases significantly if the smoke generator is overfilled.
Even tough the smoke generator will not be damaged if run dry, we recommend turning it off if possible, when empty, to extend its life.
Massoth Smoke and Cleaning Fluid, 250ml
$19.90 plus shipping
In stock
Please contact us to order
Product number: 8412501
Massoth's odorless and non-staining smoke and cleaning fluid is recommended for all Massoth smoke generators. It is safe for all LGB® paints and plastics and can be used to clean LGB® trains and tracks.
The Massoth Smoke and Cleaning fluid is a smart replacement for the no-longer-available LGB® 50010 Smoke Fluid.
250ml, plastic pipette included.