Massoth Product List → Massoth Decoder Accessories
Massoth eMOTION Volume Control Board
Product number: 8242010
$10.90 plus shipping
Please contact us to order
In stock
This potentiometer may be used to control manually the sound volume of a Massoth sound decoder; it plugs directly into a dedicated socket on the decoder.
Massoth eMOTION Reed Contact Board For LGB® Gearboxes
Product number: 8242020
$19.90 plus shipping
Please contact us to order
In stock
The Massoth reed contact switch board is used in conjunction with track-mounted magnets to trigger one of 2 sounds (e.g. bells and whistles) in an LGB® locomotive fitted with a Massoth sound decoder. The board is designed to fit with little or no modification in most LGB® gearboxes.
Massoth eMOTION Pulse Generator For LGB® Locomotives with Pressed-on Wheels
Product number: 8242030
$37.90 plus shipping
Please contact us to order
In stock
The Massoth pulse generator (hall effect sensor) is used in an LGB® locomotive to synchronize sound and pulsed smoke with the rotation of the wheels of the locomotive.
This version of the pulse generator (hall effect sensor) fits LGB® gearboxes with 6mm axles and pressed-on wheels.
Massoth eMOTION Pulse Generator For LGB® Locomotives with Screwed-on Eccentrics
Product number: 8242035
$37.90 plus shipping
Please contact us to order
In stock
The Massoth pulse generator is used in an LGB® locomotive to synchronize sound and pulsed smoke with the rotation of the wheels of the locomotive.
This version of the pulse generator (hall effect sensor) fits LGB® gearboxes with 6mm axles, pressed-on wheels and screwed-on eccentrics.
Massoth eMOTION Relay Board - 8Amps
Product number: 8242040
$18.90 plus shipping
Please contact us to order
In stock
The Massoth relay board is a general purpose switching amplifier with two 8-Amp outputs. Each output may be used as a separate switching amplifier. Both output may be used together to reverse polarity.
The relay board may be used to operate a smoke generator or a motor that draws more current that the controlling decoder can handle. It may also be used to provide direction-sensitive control of pantographs in DCC operations.
Massoth eMOTION 6V Fixed Voltage Regulator
Product number: 8242050
$18.90 plus shipping
Please contact us to order
In stock
The Massoth 6V fixed output voltage regulator delivers a stabilized 6V DC output which may used to control RC servos in digital operations, or used as a steady source of low voltage power for lights and smoke generators in analog operations.
Massoth eMOTION Firebox Light Module
Product number: 8242060
$18.90 plus shipping
Please contact us to order
In stock
A small light board with 2 long-lasting, energy efficient LEDs, suitable for installation in all steam locomotives. Using an orange and a red LED the firebox module simulates the flickering light of a wood or coal fire.
The modules work with AC, DC or DCC power, it is not polarity sensitive.
In analog operation, the firebox light module produces a steady flicker; when connected to a decoder, it can produce an animated flickering light.
The module is installed with either 2 screws or with double-sided tape. Solder pads are provided for power hookup.
The firebox module does not come with a power buffer. Provision have been made for the installation of a power buffer to improve power stabilization.
Massoth eMOTION Electronic Fuse, 2 pack
Product number: 8242070
$18.90 plus shipping
Please contact us to order
In stock
A short circuit on a layout can happen in a blink of an eye. Occasionally, the results are severe raging from burned wires to burned locomotives. The Massoth Electronic Fuse is designed to protected against damage caused by short circuits by automatically interrupting current supply that exceeds 4 Amps.
Massoth Programmable Train Destination Display, 2 pack
Product number: 8161102
$161.90 plus shipping
Please contact us to order
In stock
The Massoth programmable Train Destination Display (TDD) is the perfect model railway accessory; it is suitable for both analog and digital operations. It may be used to display a picture such as a railway icon or symbol, a text string such as the name of a railway station or a greeting, and or an analog or digital clock.
the TDD is delivered pre-programmed with about 400 railway station names and special text strings as well 18 railway icons and symbols. Ten user programmed text strings may also be added.
Massoth Track Magnets, 2 pack
Product number: 8420202
$14.90 plus shipping
Please contact us to order
In stock
The Massoth track magnet may be used to trigger sounds (e.g. bells and whistles) in locomotives equipped with sound boards and reed switches. It is suitable for use in analog and digital operations.
Massoth Light Board and Decoder Mounting Brackets, 2 pack
Product number: 8104002
$4.90 plus shipping
Please contact us to order
In stock
Massoth light board and decoder mounting brackets ensure a safe and convenient installation of PC boards and decoders into locomotives and rolling stock. The brackets may be used with LGB© 55021 decoders, Massoth L and LS decoders, and all 25mm-wide Massoth lighting boards.